Diameters Range [mm] | 100 Ø - 1000 Ø |
Pipe Length[mm] | 6m-7m |
Joining Type / Method | With rubber gasket |
Color | Outer Layer-Black Inner Layer- Blue |
Installation | It is very easy due to its low weight |
Chemical Resistance | It is resistant against proper organic and inorganic acids for the pH values between 2-12 |
Installation Temperature | Minimum: -10 oC Maximum +35 oC |
Operating Temperature | Minimum: -10oC Maximum: +35oC |
Ring Stiffness | SN4 AND SN8 |
Standard | EN 13476-3 |
Approves And Certificates | Russia: Gost |
Poland: Rekomendacja | |
Ukraine: Sepro |
It can be used successfully in agricultural areas, muddy ground reclamation works, clay soiled lands, all surface and underground unloading systems, sewerage systems, industrial waste water drainage systems, infrastructures of lawn sport facilities, berm drainages of roads and for discharging unwanted water for protection of buildings and constructions with water at the foundations |
TS EN 13476-3 - KORUGE | 595,8 kB | Dosya İndir | |
SEPRO | 2,6 MB | Dosya İndir | |
GOST 1 | 2,5 MB | Dosya İndir | |
GOST 2 | 2,5 MB | Dosya İndir |
Nowadays, U-PVC Drainage Pipe systems are used mainly for drainage purpose.
Irrigation is one of the most important factors in agricultural production. The purpose of irrigation is to reach the roots of water. Insufficient or excess water has a negative effect on plant performance. Good selection of the irrigation system project will provide the most effective method to meet product needs. However, too much water or other factors cause drainage problems on the surface of the lake. Without drainage system, the quality and efficiency of the agricultural products would be bad.
When it is compared to flat-surfaced pipes, ribbed corrugated form is very resistant to soil pressures.
There are holes in the inner rings to prevent clogging.
There is no possibility of wastage.
Can be used in gritty lands without filtration.
It is suitable for flat pipes.
Pipe systems developed by GF Hakan Plastik meets the increasing global need for PE pipe which are mostly used in embedded gas and water distribution lines with their distinguished light-weight, easy and reliable installation features.
They are produced as two types, namely high-density and low-density for the gas and water systems.
The PE Pipe Systems used for water transfer are classified as follows according to the type of the raw material from which they are produced:
PE 32 - Low-Density Piping Systems
PE 100 - High-Density Piping Systems
PE 100 RC - High-Density Piping Systems Resistant to Cracking
The PE Pipe Systems used for gas transfer are classified as follows according to the type of the raw material from which they are produced:
PE 80 - Medium-Density Piping Systems
PE 100 - High-Density Piping Systems
They are produced in diameters range of Ø20 mm - Ø630 mm.
They can be jointed quickly and easily by welding methods such as electrofusion, butt-welding and socket fusion.
They are produced in compliance with TSE EN 12201-2 and TSE EN 1552-2 standards.
Excellent resistance to the aggressive liquids caused by industrial activities.
They are resistant to almost all corrosion types that are chemical or electrochemical in the nature.
Cement welding and push-fit options are available.
Hygienic, no bacteria growth and smell.
Fire resistant. Suitable to be used in both domestic and industrial installations.
The used material is completely resistant to all types of metal oxidation due to non-metallic structure.
U-PVC pipes made from tasteless and odorless material are neutral for all carried fluids.
They are produced in two ways:
Bonding Muff Pipes
Mounted Muff Pipes
Cement socketed pipes are at the diameter of Ø20-32-40-50 mm, mounted spigots push-fit socketed pipes are at the diameter of Ø63-500 mm OD.
Fast and easy assembly.
Minimum maintenance costs.
No clogging occurs because it has smooth inner surface.
It provides additional protection because it is non-combustible when it is used for both domestic and industrial electrical installations.
It is produced in compliance with TS EN 1452-2 standard.